Products
Ironaway Frequently Asked Questions
- Do they fit between the studs?
- Can they be installed at any height?
- Are they difficult to install?
- Are the electrical models hard to wire?
- If we don't order the swivel now, can we get it later?
- Can we order it without a door?
- Do the doors come prefinished?
- What are the door dimensions?
- What are the rough in opening dimensions?
- Can the door be hinged on the left side?
Do they fit between the studs?
All models, except the NE-242, are designed to fit between standard 2x4 studs on 16" centers.
Can they be installed at any height?
All models can be installed at the height of your choice. Typical ironing board height is 34"-36. from the floor.
Are they difficult to install?
The product is very easy to install. It basically requires identifying the desired location, cutting and removing the drywall, slipping the unit between the studs and attaching it with the installation screws provided. All units are preassembled and ready to install.
Are the electrical models hard to wire?
Electrical models are pre-wired so they only need to be pigtailed with the incoming electrical wire. The pigtails are located at the bottom of the electrical raceway. All electrical work must be done in accordance with all applicable electrical codes. Electrical models utilize 15 amps.
If we don't order the swivel now, can we get it later?
The swivel is not a retrofit item. Since it utilizes more interior space due to its rugged undercarriage, the frame on a swivel cabinet is deeper than cabinets without swivels. For this reason, swivels must be ordered at the time of purchase and cannot be added later. Where applicable, all other options available on the ironing centers can be added after the original purchase.
Can we order it without a door?
A "no door "option is one of the available options. If selected, the unit will arrive without a door allowing you to match custom cabinetry. When this option is selected the piano hinge and hardware is not included with the unit. This is done so you can match hardware with your cabinetry.
Do the doors come prefinished?
All wood doors come unfinished so you can customize your unit to match the room décor. The interior has been painted a cool gray saving you hours of unnecessary finishing time.
What are the door dimensions?
The door dimensions for all models (except model A-46) are 15"Wx47 7/8" L. The model A-46 is 15"Wx60 5/8" L.
What are the rough in opening dimensions?
Rough in openings for all models (except model A-46) are 14 ¼"Wx47 1/8"Lx3 7/8"D. The model A-46 is 14 ¼"Wx59 7/8"Lx3 7/8"D.
Can the door be hinged on the left side?
Yes, all units may be ordered with a left hand hinge at no additional charge. All units come standard with a right hand hinge. (As you face the unit the hinge is on the right hand side of the cabinet.)