Products

Power Units

Vacuflo True Cyclonic

Specifications | Installation

VACUFLO's True Cyclonic® design ensures maximum vacuum power 100% of the time, eliminating dirt and allergens from the home.

VACUFLO True Cyclonic Power Units provide sustained cleaning power by separating the dirt from the airflow. Unlike vacuum systems that rely on bags or filters, the powerful performance of the VACUFLO system does not decrease as dirt accumulates.

VACUFLO's Cyclonic Filtration Technology™ creates a powerful centrifugal force that separates dirt and debris from the airflow.

As the dirt spins around, the air pressure forces it through the cyclonic cone and deposits 96-98% of the vacuumed dirt into an easy-to-empty canister. The remaining 2-4% of fine dust particles are exhausted outside. With VACUFLO True Cyclonic, there is no chance for dust or vacuum odors to recirculate into your living area. The result is a cleaner, fresher and healthier home.

True Cyclonic Specifications


PERFORMANCE

260


The perfect choice for homes up to 3,000 square feet

466Q

Quiet Series
The perfect choice for homes up to 5,000 square feet.

566Q

Quiet Series
The perfect choice for homes up to 8,000 square feet.

760


The perfect choice for homes up to 12,000 square feet.

960


The perfect choice for homes up to 18,000 square feet.
Sealed Vacuum (H20 lift) 106" 121" 135" 111" 125"
CFM Max 110 114 118 224 232
Max Air Watts* 371 477 535 824 990
Volts 120 120 120 120 120
Max/Avg Amps** 12.6/10.5 14.9/11.6 15.6/12.0 27.2/22.2 29.0/21.0
Level of Quietness (decibels)*** 70.1 dBA 59.7 dBA 60.7 dBA 67.8 dBA 70.9 dBA
FEATURES
Filtration		 True Cyclonic, requires no bags or filters True Cyclonic, requires no bags or filters True Cyclonic, requires no bags or filters True Cyclonic, requires no bags or filters True Cyclonic, requires no bags or filters
Collection Capacity 5 1/2 gallons 6 gallons 6 gallons 6 gallons 13 1/2 gallons
Low Voltage
Controls		 24 V PC Board 24 V PC Board 24 V PC Board 24 V PC Board (2 single pole relays) 24 V PC Board (2 single pole relays)
Overload Heat
Protection		 Pushbutton resettable circuit protector Pushbutton resettable circuit protector Pushbutton resettable circuit protector 2 pushbutton resettable circuit protector 2 pushbutton resettable circuit protector
Warranty Lifetime Limited +3 Lifetime Limited +3 Lifetime Limited +3 Lifetime Limited +3 Lifetime Limited +3
Construction 20 gauge steel
Powder-coated finish		 20 gauge steel
Powder-coated finish		 20 gauge steel
Powder-coated finish		 20 gauge steel
Powder-coated finish		 18 gauge steel
Powder-coated finish
Dimensions/
Weight		 12 5/8" dia. X 36 3/8" high
26 pounds		 12 5/8" dia. X 38 7/8" high
28 pounds		 12 5/8" dia. X 40 1/4" high
31 pounds		 12 5/8" dia. X 42 1/8" high
43 pounds		 18 1/4" dia. X 40 1/2" high
84 pounds
INSTALLATION
Electrical
Requirements		 • 120V/60Hz, 1 ph, 15 amp circuit
• Separate circuit recommended
• 6' cord for NEMA type 5-15R receptacle with grounding wire		 • 120V/60Hz, 1 ph, 15 amp circuit
• Separate circuit recommended
• 6' cord for NEMA type 5-15R receptacle with grounding wire		 • 120V/60Hz, 1 ph, 15 amp circuit
• Separate circuit recommended
• 6' cord for NEMA type 5-15R receptacle with grounding wire		 • 120V/60Hz, 1 ph, 30 amp circuit
• Separate circuit recommended
• 6' cord for NEMA type L5-30 receptacle with grounding wire		 • 120V/60Hz, 1 ph, 30 amp circuit
• Separate circuit recommended
• 6' cord for NEMA type L5-30 receptacle with grounding wire
Mounting
Requirements		 Basement, garage, utility room. Prefer outside wall. Mounting bracket mounted on wall stud or masonry wall. Basement, garage, utility room. Prefer outside wall. Mounting bracket mounted on wall stud or masonry wall. Basement, garage, utility room. Prefer outside wall. Mounting bracket mounted on wall stud or masonry wall. Basement, garage, utility room. Prefer outside wall. Mounting bracket mounted on wall stud or masonry wall. Basement, garage, utility room. Prefer outside wall. Mounting bracket mounted on wall stud or masonry wall.
Exterior
Venting		 Single exhaust muffler included Single exhaust
muffler included		 Single exhaust muffler included Separate dual exhaust2 mufflers included Separate dual exhaust 2 mufflers included

True Cyclonic Installation


  1. Power Units - The power unit can usually be installed in a basement, garage, or utility room. It is best to choose a location near an exterior wall to minimize the length of the exhaust run.
  2. Inlet Valve Locations - Inlet valves are usually placed on interior walls, in hallways, near doorways or close to the bottom of stairways. Potential furniture placement should be considered when determining valve locations. The objective is to use as few inlet valves as possible while providing whole house coverage. Inlet valves can be situated between studs, clear of obstructions like plumbing, wiring, heating ducts, etc. They are typically positioned level with the height of electrical receptacles. In new home installations, the system is installed after HVAC, electric and plumbing, but before drywall.
  3. In-wall Tubing and Low Voltage Wiring - Tubing and low voltage wiring are run in tandem to each valve location, expediting installation time. Both are installed beginning with the inlet valve farthest from the unit.